The hydraulic bending machine can meet the requirements of various workpieces.

The hydraulic bending machine consists of a base, a working table and a clamping plate. The working table is placed on the base, and it is composed of a base frame and a pressing plate. The base frame is connected to the clamping plate through a hinge. The base frame is composed of a housing, a coil and a cover plate. The coil is placed in the depression of the housing, and the top of the depression is covered by the cover plate. When in use, the coil is energized by a wire, and after energization, it generates a gravitational force, thereby achieving the clamping of the thin plate between the pressing plate and the base frame. Due to the use of electromagnetic force for clamping, the pressing plate can be made to meet various requirements for workpieces, and it can also process workpieces with side walls. The bending machine can meet the needs of various workpieces by replacing the bending machine mold.
Advantages of the hydraulic bending machine:
Based on the principle of hydraulic transmission, the components (cylinders and pistons or plungers) are constructed simply. In terms of structure, they can easily achieve a large working pressure, a large working space and a long working stroke, thus having strong adaptability and being convenient for handling large workpieces or long and high workpieces.
2. At any position during the external stroke, the press machine can exert an additional maximum pressure. It is possible to maintain a constant pressure for a considerable period at the lower transition point, which is highly desirable for many processes.
3. The total travel of the slider can be freely adjusted within a certain range. The lower conversion point of the slider's travel can be controlled or modified according to pressure or the position of the travel.
4. The sliding block speed can be adjusted within a wide range to a considerable extent, thus being able to meet the varying requirements of the process for the sliding block speed. When the pump is directly driven, the adjustment of the sliding block speed can be related to pressure and stroke.
5. Compared with the forging hammer, the task machine is more compact, with less impact, vibration and noise. It brings significant benefits to the health of workers, the foundation of the factory building, the surrounding environment and the equipment itself.
6. A simple method can be used to regulate or limit the pressure within a task cycle. This approach is less likely to cause overload and is easier to maintain various molds.